(Mt) – MGMT 310 APUS Theories of Management Discussion

FIND A SOLUTION AT Academic Writers Bay

Operation Management for MBA

Operation Management for MBA
Chapter 1: Operations Strategy and Global Competitiveness 1) A purposeful collection of people, objects, and procedures for operating within an environment is known as a (n): a) Operation b) Sub -system c) System d) Sub-operation 2)  Which of the following is among the six major elements of a production system? a) Inputs b) Output c) Monitoring and legislative compliance d) Only A and B 3) Value can be added to an entity in all the following ways, EXCEPT: a) Altering b) Facilitating c) Storing d) Transporting 4) A type of output that commonly results from a production system is: a) A product b) A service c) Neither A nor B d) Both A and B 5. Which of the following is NOT considered a characteristic of a service? a) Intangible b) Labor-intense production c) Quality difficult to measure d) Delayed consumption 6) A distinction between normal goods and information/knowledge is that a) Normal goods wear out, but information/knowledge does not b) Information/knowledge can be given or sold to many others c) Information/knowledge is subject to diminishing returns, but physical outputs are subject to increasing returns d) Both A and B Chapter 2: Process Planning and Design 7) Which of the following is NOT a basic form of transformation systems? a) Job shop b) Flow shop c) Continuous transformation process d) All of the above are basic forms of transformation systems 8) Layout analysis is usually performed for the following purpose(s): a) Maximize operational efficiency b) Reduce safety or health hazards c) Minimize interference or noise between areas d) All of the above 9) A __ is commonly used to produce highly standardized outputs in extremely large volume a) Job shop b) Flow shop c) Continuons transformation processor. d) Cellular production 10) Continuous processes typically run 24 hours a day, seven days a week because: a) There is a need to spread their huge fixed cost over as large a volume as possible b) Price is often the single most important factor in competing with their products c) Facilities are a maze of pipes, conveyors, tanks, valves, vats, and bins d) Both A and B 11) Which of the following is a major difference between continuous processes and flow shops? a) Inputs are fixed for continuous shops and the flow of work is continuous for flow shops b) In flow shops, there is a discrete product or service instead of products not naturally divisible c) Degree of automation is higher for flow shops d) Continuous shops tend to be very small while flow shops tend to be very large 12) Which of the following is NOT a well-known problem in flow shops? a) Boredom b) Workers may be dehumanized by manufacturing lines c) Absenteeism d) All of the above are well-known problems in flow shops Chapter 3: Controlling Processes 13) Which one of the following perceptual measures corresponds to a company that is in the internally neutral stage of operational effectiveness? a) Outside experts are called in for strategic decisions b) Aim is to achieve competitive parity c) A manufacturing strategy is formulated and pursued d) Goal is to achieve competitive superiority 14) Some benefits of the balanced scorecard include: a) It helps align departmental and personal goals to the organization b) It is an effective way to clarify and gain authority within the organization c) It is a mechanism for aligning personal goals with societal goals d) It helps organizations track their competitors 15) With respect to strategy maps and balanced scorecards, which of the following is FALSE? a) Both address four perspectives: financial, customer, internal business process, and learning and growing perspectives b) Strategy maps represent an easier way to develop a balanced scorecard c) Both serve to monitor the cause-and-effect relationships identified through the development of a balanced scorecard d) Employees’ understanding of strategy interactions is enhanced through their use 16) FMEA stands for: a) Fail safe Mode and Effectuation Analysis b) Failure in Massive Effects Analysis c) Failure Mode in Eviction Analytics d) Failure Mode and Effect Analysis 17)  Service defections are important in process control for services because: a) No advertising is necessary to get the business of long-term customers b) They are equally important to organizations that produce tangible outputs c) A customer who takes their business elsewhere is analogous to a product defect d) Long-time customers are more likely to purchase additional products 18) A useful tool for controlling processes such as quality, scrap, turnover, revenues, progress, costs, and so on is the _________ _________. Chapter 4: Process Improvement: Minimizing Variation through Six Sigma 19) Six Sigma (DMAIC) is best applied when: a) The process is fundamentally flawed b) The process is brand new c) There is too much variation in the process d) There is too much waste in the process 20) Business Process Design (BPD) is also adequately named the following EXCEPT: a) Reengineering b) Business process innovation c) Business process engineering d) Downsizing or restructuring 21) Which of the following is NOT an original component of reengineering? a) A radical change in the way work is performed b) Process-centered reorganization of activities c) An emphasis in getting rid of unnecessary employees d) A dramatic improvement in performance 22)  The relationship between the natural variation in the production system and the product’s design specifications can be quantified using: a) Six sigma b) Control charts c) A process capability index d) Fishbone diagrams 23) A literal interpretation of six-sigma is: a) 4.3 defects per million opportunities (DPMO) b) 3.4 defects per billion opportunities (DPBO) c) 3.4 defects per million opportunities (DPMO) d) 3.1 defects per million opportunities (DPMO) 24) In order to claim status as a Six Sigma Black Belt, it has become customary for individuals to undergo a process of ________. 25) Measuring _________ _________ is analogous to product defects in service quality.

International Assignments Presentation

International Assignments Presentation
Assignment 3: Presentation of Assignment 2 In this assignment, you will condense information from Assignment 2 to create a PowerPoint presentation. Create a nine (9) slide PowerPoint Presentation in which you: Provide a title slide (as indicated in the format requirements below) followed by a slide with an introduction to your presentation. Summarize your response to each of the criteria in Assignment 2 – one (1) slide per criterion, for a total of six (6) slides. Provide a summary slide which addresses key points of your paper. Narrate each slide, using a microphone or notes, indicating what you would say if you were actually presenting in front of an audience. Your assignment must follow these formatting requirements: Format the PowerPoint presentation with headings on each slide and three to four (3-4) relevant graphics (photographs, graphs, clip art, etc.), ensuring that the presentation is visually appealing and readable from 18 feet away. Check with your professor for any additional instructions. Include a title slide containing the title of the assignment, the student’s name, the professor’s name, the course title, and the date. The title slide is not included in the required slide length.Assignment 2 International Assignments

Order from Academic Writers Bay
Best Custom Essay Writing Services

QUALITY: ORIGINAL PAPER NO PLAGIARISM - CUSTOM PAPER

Why Choose Us?

  • non-plagiarized Papers
  • 24/7 /365 Service Available
  • Affordable Prices
  • Any Paper, Urgency, and Subject
  • Will complete your papers in 6 hours
  • On-time Delivery
  • Money-back and Privacy guarantees
  • Unlimited Amendments upon request
  • Satisfaction guarantee
SATISFACTION
SATISFACTION

How It Works

  • Click on the “Place Your Order” tab at the top menu or “Order Now” icon at the bottom and a new page will appear with an order form to be filled.
  • Fill in your paper’s requirements in the "PAPER DETAILS" section.
  • Fill in your paper’s academic level, deadline, and the required number of pages from the drop-down menus.
  • Click “CREATE ACCOUNT ; SIGN IN” to enter your registration details and get an account with us for record-keeping and then, click on “PROCEED TO CHECKOUT” at the bottom of the page.
  • From there, the payment sections will show, follow the guided payment process and your order will be available for our writing team to work on it.

About AcademicWritersBay.com

AcademicWritersBay.comnbsp;is an easy-to-use and reliable service that is ready to assist you with your papers 24/7/ 365days a year. 99% of our customers are happy with their papers. Our team is efficient and will always tackle your essay needs comprehensively assuring you of excellent results. Feel free to ask them anything concerning your essay demands or Order.

AcademicWritersBay.com is a private company that offers academic support and assistance to students at all levels. Our mission is to provide proficient andnbsp;high quality academic servicesnbsp;to our highly esteemed clients. AcademicWritersBay.com is equipped with competent andnbsp;proficient writersnbsp;to tackle all types of your academic needs, and provide you with excellent results. Most of our writers are holders ofnbsp;master's degreesnbsp;ornbsp;PhDs, which is an surety of excellent results to our clients. We provide assistance to students all over the world.
We provide high quality term papers, research papers, essays, proposals, theses and many others. Atnbsp;AcademicWritersBay.com, you can be sure ofnbsp;excellent gradesnbsp;in your assignments and final exams.

NO PLAGIARISM
NO PLAGIARISM
error: Content is protected !!